dmesg - AMD Ryzen 9 3950X 16-Core

Return To AMD Ryzen 9 3950X 16-Core System Information

Linux version 5.4.0-37-generic (buildd@lcy01-amd64-001) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #41-Ubuntu SMP Wed Jun 3 18:57:02 UTC 2020 (Ubuntu 5.4.0-37.41-generic 5.4.41)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Hygon HygonGenuine
  Centaur CentaurHauls
  zhaoxin   Shanghai  
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009d01fff] usable
BIOS-e820: [mem 0x0000000009d02000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
BIOS-e820: [mem 0x000000000a20c000-0x00000000da2acfff] usable
BIOS-e820: [mem 0x00000000da2ad000-0x00000000db823fff] reserved
BIOS-e820: [mem 0x00000000db824000-0x00000000db9a9fff] usable
BIOS-e820: [mem 0x00000000db9aa000-0x00000000dbdd0fff] ACPI NVS
BIOS-e820: [mem 0x00000000dbdd1000-0x00000000dc9a6fff] reserved
BIOS-e820: [mem 0x00000000dc9a7000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000081f2fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xd6371018-0xd6390a57] usable ==> usable
e820: update [mem 0xd6371018-0xd6390a57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009d01fff] usable
reserve setup_data: [mem 0x0000000009d02000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
reserve setup_data: [mem 0x000000000a20c000-0x00000000d6371017] usable
reserve setup_data: [mem 0x00000000d6371018-0x00000000d6390a57] usable
reserve setup_data: [mem 0x00000000d6390a58-0x00000000da2acfff] usable
reserve setup_data: [mem 0x00000000da2ad000-0x00000000db823fff] reserved
reserve setup_data: [mem 0x00000000db824000-0x00000000db9a9fff] usable
reserve setup_data: [mem 0x00000000db9aa000-0x00000000dbdd0fff] ACPI NVS
reserve setup_data: [mem 0x00000000dbdd1000-0x00000000dc9a6fff] reserved
reserve setup_data: [mem 0x00000000dc9a7000-0x00000000deffffff] usable
reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000081f2fffff] usable
efi: EFI v2.70 by American Megatrends
efi:  ACPI 2.0=0xdbd4d000  ACPI=0xdbd4d000  SMBIOS=0xdc7a2000  SMBIOS 3.0=0xdc7a1000  MEMATTR=0xd8a53018  ESRT=0xd8e9dc18 
secureboot: Secure boot disabled
SMBIOS 3.2.1 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X570M Pro4, BIOS P2.30 11/26/2019
tsc: Fast TSC calibration failed
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x81f300 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFE0000000 write-back
  3 base 0000DC0A0000 mask FFFFFFFF0000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000820000000 aka 33280M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
total RAM covered: 3583M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64M 	num_reg: 4  	lose cover RAM: 0G
e820: update [mem 0xdc0a0000-0xdc0affff] usable ==> reserved
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000d8e9dc18 to 0x00000000d8e9dc50.
e820: update [mem 0xd8e9d000-0xd8e9dfff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x44b001000, 0x44b001fff] PGTABLE
BRK [0x44b002000, 0x44b002fff] PGTABLE
BRK [0x44b003000, 0x44b003fff] PGTABLE
BRK [0x44b004000, 0x44b004fff] PGTABLE
BRK [0x44b005000, 0x44b005fff] PGTABLE
BRK [0x44b006000, 0x44b006fff] PGTABLE
BRK [0x44b007000, 0x44b007fff] PGTABLE
BRK [0x44b008000, 0x44b008fff] PGTABLE
BRK [0x44b009000, 0x44b009fff] PGTABLE
BRK [0x44b00a000, 0x44b00afff] PGTABLE
BRK [0x44b00b000, 0x44b00bfff] PGTABLE
BRK [0x44b00c000, 0x44b00cfff] PGTABLE
secureboot: Secure boot disabled
RAMDISK: [mem 0x38770000-0x3d490fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DBD4D000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DBD4D098 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000DBD54308 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000DBD4D1E8 00711D (v02 ALASKA A M I    01072009 INTL 20120913)
ACPI: FACS 0x00000000DBDB9E00 000040
ACPI: APIC 0x00000000DBD54420 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000DBD54580 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x00000000DBD545C8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000DBD54668 0001CC (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
ACPI: SSDT 0x00000000DBD54838 008C98 (v02 AMD    AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DBD5D4D0 003190 (v01 AMD    AMD AOD  00000001 INTL 20120913)
ACPI: MCFG 0x00000000DBD60660 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: AAFT 0x00000000DBD606A0 0003EA (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
ACPI: HPET 0x00000000DBD60A90 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: SSDT 0x00000000DBD60AC8 000024 (v01 AMD    BIXBY    00001000 INTL 20120913)
ACPI: UEFI 0x00000000DBD60AF0 000042 (v01 ALASKA A M I    00000002      01000013)
ACPI: PCCT 0x00000000DBD60B38 00006E (v01 AMD    AMD PCCT 00000001 AMD  00000000)
ACPI: SSDT 0x00000000DBD60BA8 007D49 (v01 AMD    AMD CPU  00000001 AMD  00000001)
ACPI: CRAT 0x00000000DBD688F8 001D58 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
ACPI: CDIT 0x00000000DBD6A650 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
ACPI: SSDT 0x00000000DBD6A680 001D34 (v01 AMD    AmdTable 00000001 INTL 20120913)
ACPI: WSMT 0x00000000DBD6C3B8 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000081f2fffff]
NODE_DATA(0) allocated [mem 0x81f2d5000-0x81f2fffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000081f2fffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x0000000009d01fff]
  node   0: [mem 0x000000000a000000-0x000000000a1fffff]
  node   0: [mem 0x000000000a20c000-0x00000000da2acfff]
  node   0: [mem 0x00000000db824000-0x00000000db9a9fff]
  node   0: [mem 0x00000000dc9a7000-0x00000000deffffff]
  node   0: [mem 0x0000000100000000-0x000000081f2fffff]
Zeroed struct page in unavailable ranges: 17887 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000081f2fffff]
On node 0 totalpages: 8370721
  DMA zone: 64 pages used for memmap
  DMA zone: 27 pages reserved
  DMA zone: 3999 pages, LIFO batch:0
  DMA32 zone: 14047 pages used for memmap
  DMA32 zone: 898946 pages, LIFO batch:63
  Normal zone: 116684 pages used for memmap
  Normal zone: 7467776 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 32 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09d02000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0a200000-0x0a20bfff]
PM: Registered nosave memory: [mem 0xd6371000-0xd6371fff]
PM: Registered nosave memory: [mem 0xd6390000-0xd6390fff]
PM: Registered nosave memory: [mem 0xd8e9d000-0xd8e9dfff]
PM: Registered nosave memory: [mem 0xda2ad000-0xdb823fff]
PM: Registered nosave memory: [mem 0xdb9aa000-0xdbdd0fff]
PM: Registered nosave memory: [mem 0xdbdd1000-0xdc9a6fff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
Built 1 zonelists, mobility grouping on.  Total pages: 8239899
Policy zone: Normal
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32620436K/33482884K available (14339K kernel code, 2397K rwdata, 4952K rodata, 2712K init, 4992K bss, 862448K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 44484 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
	Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3493.423 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x325b0c00e96, max_idle_ns: 440795322907 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6986.84 BogoMIPS (lpj=13973692)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD Ryzen 9 3950X 16-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31
smp: Brought up 1 node, 32 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 32 processors activated (223579.07 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20bfff] (49152 bytes)
PM: Registering ACPI NVS region [mem 0xdb9aa000-0xdbdd0fff] (4354048 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 12:25:17, date: 2020-07-29
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1596025517.216:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 7 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec02fff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
pci 0000:00:01.2: enabling Extended Tags
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:1484] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:08.3: [1022:1484] type 01 class 0x060400
pci 0000:00:08.3: enabling Extended Tags
pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
pci 0000:01:00.0: [1022:57ad] type 01 class 0x060400
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16 GT/s x8 link)
pci 0000:00:01.2: PCI bridge to [bus 01-07]
pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
pci 0000:00:01.2:   bridge window [mem 0xf7200000-0xf77fffff]
pci 0000:02:01.0: [1022:57a3] type 01 class 0x060400
pci 0000:02:01.0: enabling Extended Tags
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:06.0: [1022:57a3] type 01 class 0x060400
pci 0000:02:06.0: enabling Extended Tags
pci 0000:02:06.0: PME# supported from D0 D3hot D3cold
pci 0000:02:08.0: [1022:57a4] type 01 class 0x060400
pci 0000:02:08.0: enabling Extended Tags
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
pci 0000:02:09.0: [1022:57a4] type 01 class 0x060400
pci 0000:02:09.0: enabling Extended Tags
pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
pci 0000:02:0a.0: [1022:57a4] type 01 class 0x060400
pci 0000:02:0a.0: enabling Extended Tags
pci 0000:02:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-07]
pci 0000:01:00.0:   bridge window [io  0xf000-0xffff]
pci 0000:01:00.0:   bridge window [mem 0xf7200000-0xf77fffff]
pci 0000:03:00.0: [1cc1:5350] type 00 class 0x010802
pci 0000:03:00.0: reg 0x10: [mem 0xf7700000-0xf7703fff 64bit]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0:   bridge window [mem 0xf7700000-0xf77fffff]
pci 0000:04:00.0: [8086:1539] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xf7600000-0xf761ffff]
pci 0000:04:00.0: reg 0x18: [io  0xf000-0xf01f]
pci 0000:04:00.0: reg 0x1c: [mem 0xf7620000-0xf7623fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:06.0: PCI bridge to [bus 04]
pci 0000:02:06.0:   bridge window [io  0xf000-0xffff]
pci 0000:02:06.0:   bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:05:00.0: [1022:1485] type 00 class 0x130000
pci 0000:05:00.0: enabling Extended Tags
pci 0000:05:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:05:00.1: [1022:149c] type 00 class 0x0c0330
pci 0000:05:00.1: reg 0x10: [mem 0xf7300000-0xf73fffff 64bit]
pci 0000:05:00.1: enabling Extended Tags
pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
pci 0000:05:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:05:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit]
pci 0000:05:00.3: enabling Extended Tags
pci 0000:05:00.3: PME# supported from D0 D3hot D3cold
pci 0000:02:08.0: PCI bridge to [bus 05]
pci 0000:02:08.0:   bridge window [mem 0xf7200000-0xf73fffff]
pci 0000:06:00.0: [1022:7901] type 00 class 0x010601
pci 0000:06:00.0: reg 0x24: [mem 0xf7500000-0xf75007ff]
pci 0000:06:00.0: enabling Extended Tags
pci 0000:06:00.0: PME# supported from D3hot D3cold
pci 0000:06:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:02:09.0: PCI bridge to [bus 06]
pci 0000:02:09.0:   bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:07:00.0: [1022:7901] type 00 class 0x010601
pci 0000:07:00.0: reg 0x24: [mem 0xf7400000-0xf74007ff]
pci 0000:07:00.0: enabling Extended Tags
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:07:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:02:0a.0: PCI bridge to [bus 07]
pci 0000:02:0a.0:   bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:08:00.0: [10de:1b06] type 00 class 0x030000
pci 0000:08:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:08:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:08:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:08:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:08:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:08:00.0: BAR 3: assigned to efifb
pci 0000:08:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8 GT/s x16 link)
pci 0000:08:00.1: [10de:10ef] type 00 class 0x040300
pci 0000:08:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:03.1: PCI bridge to [bus 08]
pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.1:   bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:09:00.0: [1022:148a] type 00 class 0x130000
pci 0000:09:00.0: enabling Extended Tags
pci 0000:00:07.1: PCI bridge to [bus 09]
pci 0000:0a:00.0: [1022:1485] type 00 class 0x130000
pci 0000:0a:00.0: enabling Extended Tags
pci 0000:0a:00.1: [1022:1486] type 00 class 0x108000
pci 0000:0a:00.1: reg 0x18: [mem 0xf7900000-0xf79fffff]
pci 0000:0a:00.1: reg 0x24: [mem 0xf7a08000-0xf7a09fff]
pci 0000:0a:00.1: enabling Extended Tags
pci 0000:0a:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:0a:00.3: reg 0x10: [mem 0xf7800000-0xf78fffff 64bit]
pci 0000:0a:00.3: enabling Extended Tags
pci 0000:0a:00.3: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.4: [1022:1487] type 00 class 0x040300
pci 0000:0a:00.4: reg 0x10: [mem 0xf7a00000-0xf7a07fff]
pci 0000:0a:00.4: enabling Extended Tags
pci 0000:0a:00.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 0a]
pci 0000:00:08.1:   bridge window [mem 0xf7800000-0xf7afffff]
pci 0000:0b:00.0: [1022:7901] type 00 class 0x010601
pci 0000:0b:00.0: reg 0x24: [mem 0xf7c00000-0xf7c007ff]
pci 0000:0b:00.0: enabling Extended Tags
pci 0000:0b:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.2: PCI bridge to [bus 0b]
pci 0000:00:08.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:0c:00.0: [1022:7901] type 00 class 0x010601
pci 0000:0c:00.0: reg 0x24: [mem 0xf7b00000-0xf7b007ff]
pci 0000:0c:00.0: enabling Extended Tags
pci 0000:0c:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.3: PCI bridge to [bus 0c]
pci 0000:00:08.3:   bridge window [mem 0xf7b00000-0xf7bfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
iommu: Default domain type: Translated 
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:08:00.0: vgaarb: setting as boot VGA device
pci 0000:08:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:08:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x09d02000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0xd6371018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd8e9d000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda2ad000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb9aa000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x81f300000-0x81fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xfd000000-0xfd0fffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io  0x0280-0x028f] has been reserved
system 00:04: [io  0x0290-0x029f] has been reserved
system 00:04: [io  0x02a0-0x02af] has been reserved
system 00:04: [io  0x02b0-0x02bf] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: [io  0x040b] has been reserved
system 00:06: [io  0x04d6] has been reserved
system 00:06: [io  0x0c00-0x0c01] has been reserved
system 00:06: [io  0x0c14] has been reserved
system 00:06: [io  0x0c50-0x0c51] has been reserved
system 00:06: [io  0x0c52] has been reserved
system 00:06: [io  0x0c6c] has been reserved
system 00:06: [io  0x0c6f] has been reserved
system 00:06: [io  0x0cd0-0x0cd1] has been reserved
system 00:06: [io  0x0cd2-0x0cd3] has been reserved
system 00:06: [io  0x0cd4-0x0cd5] has been reserved
system 00:06: [io  0x0cd6-0x0cd7] has been reserved
system 00:06: [io  0x0cd8-0x0cdf] has been reserved
system 00:06: [io  0x0800-0x089f] has been reserved
system 00:06: [io  0x0b00-0x0b0f] has been reserved
system 00:06: [io  0x0b20-0x0b3f] has been reserved
system 00:06: [io  0x0900-0x090f] has been reserved
system 00:06: [io  0x0910-0x091f] has been reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0:   bridge window [mem 0xf7700000-0xf77fffff]
pci 0000:02:06.0: PCI bridge to [bus 04]
pci 0000:02:06.0:   bridge window [io  0xf000-0xffff]
pci 0000:02:06.0:   bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:02:08.0: PCI bridge to [bus 05]
pci 0000:02:08.0:   bridge window [mem 0xf7200000-0xf73fffff]
pci 0000:02:09.0: PCI bridge to [bus 06]
pci 0000:02:09.0:   bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:02:0a.0: PCI bridge to [bus 07]
pci 0000:02:0a.0:   bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:01:00.0: PCI bridge to [bus 02-07]
pci 0000:01:00.0:   bridge window [io  0xf000-0xffff]
pci 0000:01:00.0:   bridge window [mem 0xf7200000-0xf77fffff]
pci 0000:00:01.2: PCI bridge to [bus 01-07]
pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
pci 0000:00:01.2:   bridge window [mem 0xf7200000-0xf77fffff]
pci 0000:00:03.1: PCI bridge to [bus 08]
pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.1:   bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 09]
pci 0000:00:08.1: PCI bridge to [bus 0a]
pci 0000:00:08.1:   bridge window [mem 0xf7800000-0xf7afffff]
pci 0000:00:08.2: PCI bridge to [bus 0b]
pci 0000:00:08.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:08.3: PCI bridge to [bus 0c]
pci 0000:00:08.3:   bridge window [mem 0xf7b00000-0xf7bfffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec02fff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
pci_bus 0000:01: resource 1 [mem 0xf7200000-0xf77fffff]
pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf77fffff]
pci_bus 0000:03: resource 1 [mem 0xf7700000-0xf77fffff]
pci_bus 0000:04: resource 0 [io  0xf000-0xffff]
pci_bus 0000:04: resource 1 [mem 0xf7600000-0xf76fffff]
pci_bus 0000:05: resource 1 [mem 0xf7200000-0xf73fffff]
pci_bus 0000:06: resource 1 [mem 0xf7500000-0xf75fffff]
pci_bus 0000:07: resource 1 [mem 0xf7400000-0xf74fffff]
pci_bus 0000:08: resource 0 [io  0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:08: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:0a: resource 1 [mem 0xf7800000-0xf7afffff]
pci_bus 0000:0b: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:0c: resource 1 [mem 0xf7b00000-0xf7bfffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:08:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:08:00.1: D0 power state depends on 0000:08:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 78980K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xd2371000-0xd6371000] (64MB)
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003ff)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.2: PME: Signaling with IRQ 26
pcieport 0000:00:03.1: PME: Signaling with IRQ 27
pcieport 0000:00:07.1: PME: Signaling with IRQ 29
pcieport 0000:00:07.1: AER: enabled with IRQ 29
pcieport 0000:00:08.1: PME: Signaling with IRQ 30
pcieport 0000:00:08.1: AER: enabled with IRQ 30
pcieport 0000:00:08.2: PME: Signaling with IRQ 31
pcieport 0000:00:08.2: AER: enabled with IRQ 31
pcieport 0000:00:08.3: PME: Signaling with IRQ 32
pcieport 0000:00:08.3: AER: enabled with IRQ 32
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0xf1000000, using 5120k, total 5120k
efifb: mode is 1280x1024x32, linelength=5120, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:05:00.1: xHCI Host Controller
xhci_hcd 0000:05:00.1: new USB bus registered, assigned bus number 1
xhci_hcd 0000:05:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-37-generic xhci-hcd
usb usb1: SerialNumber: 0000:05:00.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xhci_hcd 0000:05:00.1: xHCI Host Controller
xhci_hcd 0000:05:00.1: new USB bus registered, assigned bus number 2
xhci_hcd 0000:05:00.1: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-37-generic xhci-hcd
usb usb2: SerialNumber: 0000:05:00.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:05:00.3: xHCI Host Controller
xhci_hcd 0000:05:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:05:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-37-generic xhci-hcd
usb usb3: SerialNumber: 0000:05:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
xhci_hcd 0000:05:00.3: xHCI Host Controller
xhci_hcd 0000:05:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:05:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-37-generic xhci-hcd
usb usb4: SerialNumber: 0000:05:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:0a:00.3: xHCI Host Controller
xhci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0a:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.4.0-37-generic xhci-hcd
usb usb5: SerialNumber: 0000:0a:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:0a:00.3: xHCI Host Controller
xhci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:0a:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.4.0-37-generic xhci-hcd
usb usb6: SerialNumber: 0000:0a:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08701013
microcode: CPU1: patch_level=0x08701013
microcode: CPU2: patch_level=0x08701013
microcode: CPU3: patch_level=0x08701013
microcode: CPU4: patch_level=0x08701013
microcode: CPU5: patch_level=0x08701013
microcode: CPU6: patch_level=0x08701013
microcode: CPU7: patch_level=0x08701013
microcode: CPU8: patch_level=0x08701013
microcode: CPU9: patch_level=0x08701013
microcode: CPU10: patch_level=0x08701013
microcode: CPU11: patch_level=0x08701013
microcode: CPU12: patch_level=0x08701013
microcode: CPU13: patch_level=0x08701013
microcode: CPU14: patch_level=0x08701013
microcode: CPU15: patch_level=0x08701013
microcode: CPU16: patch_level=0x08701013
microcode: CPU17: patch_level=0x08701013
microcode: CPU18: patch_level=0x08701013
microcode: CPU19: patch_level=0x08701013
microcode: CPU20: patch_level=0x08701013
microcode: CPU21: patch_level=0x08701013
microcode: CPU22: patch_level=0x08701013
microcode: CPU23: patch_level=0x08701013
microcode: CPU24: patch_level=0x08701013
microcode: CPU25: patch_level=0x08701013
microcode: CPU26: patch_level=0x08701013
microcode: CPU27: patch_level=0x08701013
microcode: CPU28: patch_level=0x08701013
microcode: CPU29: patch_level=0x08701013
microcode: CPU30: patch_level=0x08701013
microcode: CPU31: patch_level=0x08701013
microcode: Microcode Update Driver: v2.2.
*** VALIDATE rdt ***
resctrl: L3 allocation detected
resctrl: L3DATA allocation detected
resctrl: L3CODE allocation detected
resctrl: MB allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (428100007, -23997475)->(690693782, -286591250)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: ccd5d83955246e171de5c4868943df7925061271'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM:   Magic number: 12:831:431
thermal cooling_device23: hash matches
rtc_cmos 00:03: setting system clock to 2020-07-29T12:25:17 UTC (1596025517)
acpi_cpufreq: overriding BIOS provided _PSD data
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2712K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1192K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
dca service started, version 1.12.1
ahci 0000:06:00.0: version 3.0
nvme nvme0: pci function 0000:03:00.0
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
pps pps0: new PPS source ptp0
igb 0000:04:00.0: added PHC on eth0
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 70:85:c2:f3:6a:43
igb 0000:04:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:04:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:04:00.0 enp4s0: renamed from eth0
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 10 seconds
nvme nvme0: 8/0/0 default/read/poll queues
 nvme0n1: p1 p2
usb 5-1: new high-speed USB device number 2 using xhci_hcd
usb 5-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.26
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB2.0 Hub
usb 5-1: Manufacturer: GenesysLogic
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 6-1: New USB device found, idVendor=05e3, idProduct=0617, bcdDevice=92.26
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: USB3.0 Hub
usb 6-1: Manufacturer: GenesysLogic
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 4 ports detected
usb 5-2: new high-speed USB device number 3 using xhci_hcd
usb 5-2: New USB device found, idVendor=0bda, idProduct=b812, bcdDevice= 2.10
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: USB3.0 802.11ac 1200M Adapter
usb 5-2: Manufacturer: Realtek
usb 5-2: SerialNumber: 123456
tsc: Refined TSC clocksource calibration: 3493.436 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x325b186289d, max_idle_ns: 440795326624 ns
clocksource: Switched to clocksource tsc
usb 5-1.4: new full-speed USB device number 4 using xhci_hcd
ahci 0000:06:00.0: failed stop FIS RX (-16)
ahci 0000:06:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq sntf ilck led clo only pmp fbs pio slum part 
scsi host0: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7500000 port 0xf7500100 irq 58
usb 6-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
usb 6-1.4: New USB device found, idVendor=05e3, idProduct=0617, bcdDevice=92.26
usb 6-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1.4: Product: USB3.0 Hub
usb 6-1.4: Manufacturer: GenesysLogic
hub 6-1.4:1.0: USB hub found
hub 6-1.4:1.0: 4 ports detected
usb 5-3: new full-speed USB device number 5 using xhci_hcd
ata1: SATA link down (SStatus 0 SControl 300)
usb 5-3: New USB device found, idVendor=046d, idProduct=0a45, bcdDevice= 1.00
usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-3: Product: Logitech USB Headset
usb 5-3: Manufacturer: Logitech
usb 5-3: SerialNumber: 000000000000
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 5-1.4: new high-speed USB device number 6 using xhci_hcd
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-3/5-3:1.3/0003:046D:0A45.0001/input/input2
hid-generic 0003:046D:0A45.0001: input,hidraw0: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:0a:00.3-3/input3
usb 5-1.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.26
usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.4: Product: USB2.0 Hub
usb 5-1.4: Manufacturer: GenesysLogic
hub 5-1.4:1.0: USB hub found
hub 5-1.4:1.0: 4 ports detected
usb 6-1.4.4: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
usb 6-1.4.4: New USB device found, idVendor=05e3, idProduct=0617, bcdDevice=92.26
usb 6-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1.4.4: Product: USB3.0 Hub
usb 6-1.4.4: Manufacturer: GenesysLogic
hub 6-1.4.4:1.0: USB hub found
hub 6-1.4.4:1.0: 4 ports detected
ahci 0000:07:00.0: failed stop FIS RX (-16)
ahci 0000:07:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf ilck led clo only pmp fbs pio slum part 
scsi host1: ahci
ata2: SATA max UDMA/133 abar m2048@0xf7400000 port 0xf7400100 irq 73
ahci 0000:0b:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0b:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
scsi host2: ahci
ata3: SATA max UDMA/133 abar m2048@0xf7c00000 port 0xf7c00100 irq 75
ahci 0000:0c:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0c:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
scsi host3: ahci
ata4: SATA max UDMA/133 abar m2048@0xf7b00000 port 0xf7b00100 irq 77
usb 5-1.4.2: new full-speed USB device number 7 using xhci_hcd
usb 5-1.4.2: New USB device found, idVendor=04d9, idProduct=a231, bcdDevice= 1.01
usb 5-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.4.2: Product: USB-HID Keyboard
usb 5-1.4.2: Manufacturer: HOLTEK
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
input: HOLTEK USB-HID Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-1/5-1.4/5-1.4.2/5-1.4.2:1.0/0003:04D9:A231.0002/input/input3
hid-generic 0003:04D9:A231.0002: input,hidraw1: USB HID v1.11 Keyboard [HOLTEK USB-HID Keyboard] on usb-0000:0a:00.3-1.4.2/input0
hid-generic 0003:04D9:A231.0003: hiddev0,hidraw2: USB HID v1.11 Device [HOLTEK USB-HID Keyboard] on usb-0000:0a:00.3-1.4.2/input1
input: HOLTEK USB-HID Keyboard Mouse as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-1/5-1.4/5-1.4.2/5-1.4.2:1.2/0003:04D9:A231.0004/input/input4
input: HOLTEK USB-HID Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-1/5-1.4/5-1.4.2/5-1.4.2:1.2/0003:04D9:A231.0004/input/input5
input: HOLTEK USB-HID Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-1/5-1.4/5-1.4.2/5-1.4.2:1.2/0003:04D9:A231.0004/input/input6
input: HOLTEK USB-HID Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-1/5-1.4/5-1.4.2/5-1.4.2:1.2/0003:04D9:A231.0004/input/input7
input: HOLTEK USB-HID Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-1/5-1.4/5-1.4.2/5-1.4.2:1.2/0003:04D9:A231.0004/input/input8
hid-generic 0003:04D9:A231.0004: input,hiddev1,hidraw3: USB HID v1.11 Mouse [HOLTEK USB-HID Keyboard] on usb-0000:0a:00.3-1.4.2/input2
hid-generic 0003:04D9:A231.0005: hiddev2,hidraw4: USB HID v1.11 Device [HOLTEK USB-HID Keyboard] on usb-0000:0a:00.3-1.4.2/input3
usb 5-1.4.3: new low-speed USB device number 8 using xhci_hcd
usb 5-1.4.3: New USB device found, idVendor=046d, idProduct=c069, bcdDevice=56.01
usb 5-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.4.3: Product: USB Laser Mouse
usb 5-1.4.3: Manufacturer: Logitech
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-1/5-1.4/5-1.4.3/5-1.4.3:1.0/0003:046D:C069.0006/input/input9
hid-generic 0003:046D:C069.0006: input,hidraw5: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:0a:00.3-1.4.3/input0
usb 5-1.4.4: new high-speed USB device number 9 using xhci_hcd
usb 5-1.4.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.26
usb 5-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.4.4: Product: USB2.0 Hub
usb 5-1.4.4: Manufacturer: GenesysLogic
hub 5-1.4.4:1.0: USB hub found
hub 5-1.4.4:1.0: 4 ports detected
raid6: avx2x4   gen() 41301 MB/s
raid6: avx2x4   xor() 22359 MB/s
raid6: avx2x2   gen() 39200 MB/s
raid6: avx2x2   xor() 24905 MB/s
raid6: avx2x1   gen() 21611 MB/s
raid6: avx2x1   xor() 18230 MB/s
raid6: sse2x4   gen() 19830 MB/s
raid6: sse2x4   xor() 11666 MB/s
raid6: sse2x2   gen() 19253 MB/s
raid6: sse2x2   xor() 12409 MB/s
raid6: sse2x1   gen()  8928 MB/s
raid6: sse2x1   xor()  9163 MB/s
raid6: using algorithm avx2x4 gen() 41301 MB/s
raid6: .... xor() 22359 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function   avx       
async_tx: api initialized (async)
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/rpc-statd.service:16: PIDFile= references a path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Listening on RPCbind Server Activation Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting NFSD configuration filesystem...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Mounted RPC Pipe File System.
systemd[1]: Starting pNFS block layout mapping daemon...
lp: driver loaded but no devices found
systemd[1]: Started pNFS block layout mapping daemon.
systemd[1]: Finished Load/Save Random Seed.
ppdev: user-space parallel port driver
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
systemd[1]: Mounted NFSD configuration filesystem.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting Mount unit for core18, revision 1754...
systemd[1]: Mounting Mount unit for core18, revision 1880...
systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 116...
systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 128...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506...
systemd[1]: Mounting Mount unit for inkscape, revision 7627...
systemd[1]: Mounting Mount unit for snapd, revision 8140...
systemd[1]: Mounting Mount unit for snapd, revision 8542...
systemd[1]: Mounting Mount unit for youtube-dl, revision 2840...
systemd[1]: Mounting Mount unit for youtube-dl, revision 2846...
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting Show Plymouth Boot Screen...
systemd[1]: plymouth-start.service: Succeeded.
systemd[1]: Started Show Plymouth Boot Screen.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Mounted Mount unit for core18, revision 1754.
ccp 0000:0a:00.1: enabling device (0000 -> 0002)
ccp 0000:0a:00.1: ccp enabled
systemd[1]: Mounted Mount unit for core18, revision 1880.
IPMI message handler: version 39.2
ipmi device interface
systemd[1]: Mounted Mount unit for gnome-3-28-1804, revision 116.
systemd[1]: Mounted Mount unit for gnome-3-28-1804, revision 128.
systemd[1]: Mounted Mount unit for inkscape, revision 7627.
systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
cfg80211: Loading compiled-in X.509 certificates for regulatory database
systemd[1]: Mounted Mount unit for gtk-common-themes, revision 1506.
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
MCE: In-kernel MCE decoding enabled.
mc: Linux media interface: v0.10
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
snd_hda_intel 0000:08:00.1: Disabling MSI
snd_hda_intel 0000:08:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:0a:00.4: enabling device (0000 -> 0002)
snd_hda_codec_realtek hdaudioC2D0: ALCS1200A: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALCS1200A: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC2D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC2D0:    inputs:
snd_hda_codec_realtek hdaudioC2D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC2D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC2D0:      Line=0x1a
88x2bu: loading out-of-tree module taints kernel.
systemd[1]: Started Journal Service.
88x2bu: module verification failed: signature and/or required key missing - tainting kernel
systemd-journald[659]: Received client request to flush runtime journal.
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card2/input10
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card2/input11
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card2/input12
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card2/input13
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card2/input14
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia-nvlink: Nvlink Core is being initialized, major device number 234
nvidia 0000:08:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
usb 5-3: Warning! Unlikely big volume range (=496), cval->res is probably wrong.
usb 5-3: [51] FU [Mic Playback Volume] ch = 1, val = 0/7936/16
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  440.64  Fri Feb 21 01:17:26 UTC 2020
usb 5-3: Warning! Unlikely big volume range (=1008), cval->res is probably wrong.
usb 5-3: [49] FU [Headphone Playback Volume] ch = 2, val = -16129/-1/16
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  440.64  Fri Feb 21 00:43:19 UTC 2020
usb 5-3: Warning! Unlikely big volume range (=496), cval->res is probably wrong.
usb 5-3: [50] FU [Mic Capture Volume] ch = 1, val = 0/7936/16
[drm] [nvidia-drm] [GPU ID 0x00000800] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:08:00.0 on minor 0
usbcore: registered new interface driver snd-usb-audio
nvidia-uvm: Loaded the UVM driver, major device number 510.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
audit: type=1400 audit(1596025522.780:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1116 comm="apparmor_parser"
audit: type=1400 audit(1596025522.780:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1111 comm="apparmor_parser"
audit: type=1400 audit(1596025522.780:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1117 comm="apparmor_parser"
audit: type=1400 audit(1596025522.780:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1113 comm="apparmor_parser"
audit: type=1400 audit(1596025522.780:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=1102 comm="apparmor_parser"
audit: type=1400 audit(1596025522.780:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1108 comm="apparmor_parser"
audit: type=1400 audit(1596025522.780:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1108 comm="apparmor_parser"
audit: type=1400 audit(1596025522.780:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1112 comm="apparmor_parser"
audit: type=1400 audit(1596025522.780:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1112 comm="apparmor_parser"
audit: type=1400 audit(1596025522.780:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1103 comm="apparmor_parser"
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
vboxdrv: Found 32 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3493435986 Hz
vboxdrv: Successfully loaded version 6.1.8 (interface 0x002d0001)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input17
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input18
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
caller os_map_kernel_space.part.0+0x73/0x80 [nvidia] mapping multiple BARs
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
usbcore: registered new interface driver rtl88x2bu
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
rtl88x2bu 5-2:1.0 wlx1cbfcee63f07: renamed from wlan0
NFSD: Using UMH upcall client tracking operations.
NFSD: starting 90-second grace period (net f0000098)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
IPv6: ADDRCONF(NETDEV_CHANGE): wlx1cbfcee63f07: link becomes ready
TCP: wlx1cbfcee63f07: Driver has suspect GRO implementation, TCP performance may be compromised.
perf: interrupt took too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
perf: interrupt took too long (3156 > 3143), lowering kernel.perf_event_max_sample_rate to 63250
perf: interrupt took too long (3954 > 3945), lowering kernel.perf_event_max_sample_rate to 50500
perf: interrupt took too long (4966 > 4942), lowering kernel.perf_event_max_sample_rate to 40250

Return To AMD Ryzen 9 3950X 16-Core System Information